| General -> Accessories. | Passenger back rest quick r... - Hand Guards for Thunderbird | | | | Categories : |
|  | Topic : Riders Backrest again |  |
| | | stevemcc | | Set |  |  | | Reg. Date | : | 03/07/2013 | | Posts | : | 2 | | Location | : | United Kingdom |
|
| | Posted : 16 Feb 2020 - 12:26 Post title : Riders Backrest again | | | Hi all
I'm looking at buying a Fehling riders backrest
Does anyone know if this will fit with the easybracket luggage mounts and standard Triumph bags I already have?
The easybrackets fit on the rear 2 mudguard mounting holes so I'm hoping there is enough clearance.
|
|
| | | VABird | | Jupiter | |  | | Reg. Date | : | 28/09/2014 | | Posts | : | 1,373 | | Location | : | BEDFORD, Virginia, United States |
|
| | Posted : 17 Feb 2020 - 22:42 Post title : Re: Riders Backrest again (Re: stevemcc) | | | My guess is no since the EZ brackets use the forward and middle bolts on the fender support.
If you could offset the middle bolt (back on EZ bracket) with a spacer the same distance as the backrest protrudes, then probably so.
| The ride may be fun, but in the Great Scheme of things, it really is about the destination! John 3:16 
|
|
| | | RodneyClark | | Set | | | Reg. Date | : | 19/01/2015 | | Posts | : | 43 | | Location | : | United States |
|
| | Posted : 22 Sep 2020 - 14:26 Post title : Re: Riders Backrest again (Re: VABird) | | | Always go for the most comfortable one I think J&P Cycles is a good option for this bike.
|
|
| | | GerPa | | Jupiter | |  | | Reg. Date | : | 10/12/2011 | | Posts | : | 1,919 | | Location | : | Mackay, Central Queensland, Australia |
|
| | Posted : 23 Sep 2020 - 00:02 Post title : Re: Riders Backrest again (Re: VABird) | | | VABird wrote:
My guess is no since the EZ brackets use the forward and middle bolts on the fender support.
If you could offset the middle bolt (back on EZ bracket) with a spacer the same distance as the backrest protrudes, then probably so. |
|
It should fit, I use the 2 rearward mounts for My easybrackets,
Very Early / Old Picture ( 2012) with the Protac Backrest from Fast Eddy, when I bought the Mustang seat I have since modified the mounting brackets a little bit and lowered the backrest pad down by trimming the two upright legs.
|  May-2011-1600, 20306 Tune, Mustang Vintage Solo Seat, Meerkat Cat Bypass, + Meerkat Modified Short TORS  ,K&N Air Cleaner,K&N Oil Filter, JBQ lifting system, Gold Plug Magnetic Sump Plug,Dart Fly screen, Rivco Risers, GiPro Gear Indicator, Breakaway Cruise Control, Avon ISO Grips, Scorpion Western Low Handlebars, Kury Switchblade Pegs, Garmin Zumo390LM,Michelin RC2 on Front RC 3 on ,Modified Rear Drive Pulley Hub Bearings (Mat1600/Alex4 Modification) Front Susp: Std & 7.5W Oil /126mm Air Gap & Rear:Hagon Nitro's with 26Kg/cm Springs + Lots of other "Bling" stuff.
| | Post edited by GerPa on 23 Sep 2020 - 00:05 |
|
|
| |
| |
|